Ball, Cube Transfers

KIETEK IS MATERIAL HANDLING

KIETEK BALL TRANSFERS

KieTek manufactures several Ball Transfer models that are completely interchangeable with most other Ball Transfer Units (BTUs) in the application. BTUs make it possible to move loads horizontally in any direction, safely and quickly, with conveying speeds in excess of two meters per second.

KieTek BTUs roll freely indoors and out, with capacities ranging from 25 lbs. to more than 800 lbs. each. Models range from complete stainless steel and zinc-plated to thermoplastic for air cargo handling.

KieTek BTUs are suitable for all industries where there’s a need for efficient, omni-directional or bi-directional material handling.

KO1A0

Product Specifications

1.77" Carbon steel tapered barrel housing
1 3/16 Diameter 420c stainless steel main ball riding on 1/8" 420c carrier balls.
Heat treated 400 series bearing race
850 Lb Capacity shipping wt .677 Lb
12 Month Warranty

KO1A0 dimensional drawing

KO1AS

Product Specifications

1.77’’ Carbon Steel Tapered Barrel Housing
1-3/16 Diameter 420c stainless steel main ball riding on 1/8’’ 420c carrier balls
Heat treated 400 series bearing race
850 Lb Capacity shipping wt .677 Lb
Zinc plated steel cap for specialty applications
12 Month Warranty

(designed for special applications including high temps)

KO1AS dimensional drawing

KO1C0

Product Specifications

1.77" Injection molded thermoplastic housing
1 3/16 Diameter 420c stainless steel main ball riding on 1/8" 420c
carrier balls.
Heat treated 400 series bearing race
12 Month Warranty

KO1C0 dimensional drawing

KO1C5

Product Specifications

1.77" Injection molded thermoplastic housing
1 3/16 Diameter phenolic main ball riding on 1/8" 420c carrier balls.
Heat treated 400 series bearing race
100 Lb Capacity / shipping wt 0.221 Lbs
12 Month Warranty

KO1H0

Product Specifications

1.77" Carbon steel tapered barrel housing
1 3/16 Diameter 420c stainless steel main ball riding on 1/8" 420c carrier balls
Heat treated 400 series bearing race
550 Lb Capacity, shipping wt .677 Lb
12 Month Warranty

KO1H0 dimensional drawing

KO1I0

Product Specifications

1.77" 6061 T6 Aluminum housing Ball Transfer
1-3/16 Diameter 420c Stainless steel main ball riding on 1/8’’ 420c carrier balls
550 Lb Capacity shipping wt .480 Lb
12 Month Warranty

KO1I0 dimensional drawing

KIETEK CUBE TRANSFERS

The Cube Concept was designed to fit steel grating, fiberglass grating and cut, stamped and machined metal. It is intended for applications where a metal-bottom pallet or container is to be conveyed over the bed, and can accommodate all palletized freight for manual material conveyance. When installed in fiberglass grating, the Cube Concept offers significant noise reduction as compared with metal decks when air cargo containers are conveyed over their surface.

There are two cube products—ball transfers and rollers—and each is available in two models.

The omni-directional Cube Ball Transfer Unit (BTU) is manufactured with the same high quality as the Round Thermoplastic Housing BTU and has a load capacity of 500 lbs. The KO1D0 BTU has a two-year warranty.

The bi-directional Cube Roller Transfer is manufactured in four models: Super Duty, Heavy Duty, Medium Duty and Light Duty. The JO111 Super Duty is rated for 500 lbs., with a steel roller turning on precision sealed bearings. The JO312 Light Duty is rated for 50 lbs. and is turning on Teflon bushings. Both have a two-year warranty.

JO111

Product Specifications

1 3/4" Injection molded thermoplastic tapered housing
1 1/4" Superduty zinc plated steel roller with 22mm sealed bearing and stainless steel axle pin
500 Lb Capacity / shipping wt 0.408 Lb
12 Month Warranty

JO111 dimensional drawing

JO311

Product Specifications

1 3/4" Injection molded thermoplastic tapered housing
1 1/4 Thermoplastic Heavy Duty roller with 22mm sealed bearing and stainless steel axle pin
400 Lb Capacity / shipping wt .191 Lb
12 Month Warranty

JO311 dimensional drawing

JO312

Product Specifications

1 3/4" Injection molded tapered square housing
1 1/4" Injection molded Geolast Roller
Teflon bushings riding on a stainless steel axle pin
50 Lb Capacity / shipping wt 0.150 Lb
6 Month Warranty

JO312 dimensional drawing

KO1D0

Product Specifications

1.3/4" Injection molded thermoplastic tapered square housing
1 3/16 Diameter 420c stainless steel main ball riding on 1/8" 420c carrier balls.
Heat treated 400 series bearing race
500 Lb Capacity shipping wt .427 Lb
12 Month Warranty

KO1D0 dimensional drawing

KO1D5

Product Specifications

1.3/4" Injection molded thermoplastic tapered square housing
1 3/16 Diameter phenolic main ball riding on 1/8" 420c carrier balls.
Heat treated 400 series bearing race
100 Lb Capacity / shipping wt 0.240 Lb
12 Month Warranty

K01E0 dimensional drawing

KO1E0

Product Specifications

1.3/4" Injection molded thermoplastic tapered square zero cube housing
1 3/16 Diameter 420c stainless steel main ball riding on 1/8" 420c carrier balls.
Heat treated 400 series bearing race
500 Lb Capacity / shipping wt .419 Lb
12 Month Warranty